|
|
Control and monitoring unit for optical link station
Ovčáček, Martin ; Kolka, Zdeněk (referee) ; Prokeš, Aleš (advisor)
The aim of Master's thesis "Control and monitoring unit for optical link station" is design of hardware and software of unit, which provides remote control and data transfer through Internet. It is required monitoring and setting analog parameters of optical link station by web service. It includes description of Ethernet and net protocols. The core of unit are microcontroller C8051F120 and ethernet controller CP2200 made by Silicon Laboratories.
|
|
|
Special application of VoIP
Lembard, Tomáš ; Šebesta, Jan (referee) ; Fuchs, Michal (advisor)
The aim of this master's thesis is suggestion and following realization of voice transmission over the local network equipment and a description of used circuits and solutions in terms of hardware and software. This thesis deals with digitization of low-frequency signals, the structure of IP and UDP protocols, implementation of TCP/IP stack cIPS
|
|
|
Visualization of Longest Prefix Match Algorithms
Fomiczew, Jiří ; Matoušek, Jiří (referee) ; Kováčik, Michal (advisor)
This thesis describes the design and implementation of program for vizualization of algorithms for longest pre fix match (LPM), which is one of the most important tasks for packet classi cation and routing in TCP/IP networks. It describes necessary theory and details about selected algorithms - Trie, Tree Bitmap and CPE. Furthermore, it describes the design and implementation of program for vizualization of the search process of these algorithms with emphasis on the potential use for educational purposes. Finally, it describes the possibilities for future development and expansion of the program.
|
|
|
Network Interface for Keyword Spotting System
Skotnica, Martin ; Glembek, Ondřej (referee) ; Szőke, Igor (advisor)
A considerable part of the research in computer science is dedicated to speech recognition as the speech-controlled systems become useful in many applications. One of them is the keyword spotting which makes possible to find words in audio data. Such a detector is developed at BUT Faculty of Information Technology. The goal of this work is to propose a network interface to this keyword detector based on client/server architecture. Client connects to the server and sends audio data. Server runs keyword detector with this received data and sends the result of keyword spotting back to client. Finally client visualizes the result and interact with user.
|
|
| |
|
|
Methods for measurement of data network performance and quality parameters
Sukup, Luboš ; Zeman, Václav (referee) ; Novotný, Vít (advisor)
Master thesis involves the development of quality measurement issues and performance parameters in data networks. It describes the main technologies as they affect the quality and performance parameters and the effect of these parameters for voice, video and data services. Next are listed some methods for measuring parameters of the data network.In the practical part is selected one method of measuring network parameters and properties of this method are demonstrated by illustrative examples.
|
|
|
Design of laborotory high-speed system usage
Benda, Ondřej ; Polívka, Michal (referee) ; Škorpil, Vladislav (advisor)
This thesis deals with high-speed communication equipment based on Cisco 2821. Includes description of facilities, physical and logical diagrams, instructions for basic orientation in the operating system Cisco IOS, and the procedure for the preparation of the workplace. Further in this document, there are three laboratory task on the topic of MPLS IP, Traffic engineering with MPLS and Circuit emulation over IP. Each task includes introduction, instructions for the elaboration, the question of the task, desired outcome and brief guide for teachers.
|
|
|
AUTOMATED TESTING OF 10GbE DEVICES
Avramović, Nikola ; Dvořák, Vojtěch (referee) ; Fujcik, Lukáš (advisor)
Tato práce se zabývá návrhem modelu pro funkční verifikaci a návrhem syntetizovatelného testru 10Gb Ethernet zařízení, které používají XGMII rozhraní. Pro popis modelu je použit programovací jazyk VHDL. Práce zahrnuje vytváření bus functional modelu a návrh testru, který se implementuje jako genericky self-test modul. Výsledný návrh umožňuje verifikaci a testování PHY a MAC vrstve. Pro implementaci testru byla použita vývojová deska DE5-Net osazena FPGA obvodem Stratix V GX od firmy Altera.
|
|
|
Communication devices over GSM/GPRS
Prečan, David ; Růčka, Lukáš (referee) ; Herman, Ivo (advisor)
This master thesis deals with a data remote transmission by means of SMS and GPRS technology. The overview of current solutions is presented and then a remote temperature measurement and a data transmission employing a communication module GSM/GPRS TM1 through GSM network using GPRS technology is described. As a response to an impulse, the communication module sends SMS. The technical solution is described in details including HW and SW design of the data transfer and processing equipment using a ATmega 162 microprocessor. This equipment communicates with a server (PC), which displays the measured temperature. A prototype which was used for a validation of the design is also described.
|
|
|
Stress tester
Charvát, Ondřej ; Martinásek, Zdeněk (referee) ; Zeman, Václav (advisor)
The diploma thesis deals with network infrastructure load testing. It’s target is to design and implement a network probe which will be in a form of JMeter plugin one of the components in load tester project. It offers sufficient theoretical basis about load testing, analyzes different types of DoS which can be used to stress the tested infrastructure and also discusses some solutions for load testing realization used in practice. Following is a study of possible ways for realization of the probe with help of several open-source tools. The suitability of individual tools is evaluated from the point of view of the network probe requirements and then the most suitable ones are selected as the basis for it’s implementation. Then, a network probe design is constructed in which it’s functionality is divided into two separated plug-ins, a network probe itself and a server emulator, and the implementation phase is commenced. The implementation is done in Java programming language to allow the new components to use all the neccessary JMeter API functions. The structure of individual parts of the modules as well as many implementation details are analyzed thoroughly in the text. The final chapter of the thesis describes function of the newly created components. After their installation into the load tester the procedure and the results of the functional testing are presented. This thesis describes the whole process of developing a plug-in for JMeter software.
|
guest ::
